Quick-Start -INFT

To Set Thermocouple Type

1. Press MENU until the meter displays:
INPUT

2. Press

/MAX until the meter flashes:

3. Press MENU. The meter displays:

4. Press

/MAX until the meter displays the thermocouple type: (on right)
Your choices are J, K T, E, N, DNJ, R, S, and B.

5. Press MENU. The meter displays:

6. Press RESET twice. The meter displays: and then shows the current temperature.

To Set Temperature Units

1. Press MENU until the meter displays:
RDG.CNF

2. Press /MIN until the meter displays:
RDG.S=0

3. Press

/MAX to change the value. Your choices are: 0 = ░C, 1 = ░F, 2 = ░K

4. Press MENU to enter the value. The meter displays:

5. Press RESET twice. The meter displays: and then shows the current temperature.

To Set the Decimal Point
1. Press MENU until the meter displays:
2. Press

/MAX to move the decimal point to the desired location.

3. Press MENU. The meter displays:

4. Press RESET twice. The meter displays: and then shows the current temperature.
The INFT unit is now up and running.